GBP (£)
USD ($)
Code: INJ 2111-T
PoE injector, 60 W, RJ45 jack on screw
INJ 2111-T - Injector
PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
Data: Power over Ethernet
Serial transmission speed:10/100/1000 Mbps
Frequency range: 125 MHz
Connection method: Screw connection
Note on the connection method: CAT5e
No. of channels: 1
Tightening torque: 0.22 Nm ... 0.25 Nm
Pin assignment: 1:1
Transmission length: 100 m (including patch cables)
Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²
Serial transmission speed:10/100/1000 Mbps
Frequency range: 125 MHz
Connection method: Screw connection
Note on the connection method: CAT5e
No. of channels: 1
Tightening torque: 0.22 Nm ... 0.25 Nm
Pin assignment: 1:1
Transmission length: 100 m (including patch cables)
Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²
Max. AWG conductor cross section, flexible: 16
Min. AWG conductor cross section, flexible: 28
Single-wire/terminal point, rigid AWG max.: 16
Single-wire/terminal point, rigid AWG min.: 28
Stripping length:5 mm
Output nominal voltage: 54 V DC (PoE)
Output power: 60 W
Maximum output power: 75 W (UL)
INJ 2111-T - Injector
PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
Data: Power over Ethernet
Serial transmission speed:10/100/1000 Mbps
Frequency range: 125 MHz
Connection method: Screw connection
Note on the connection method: CAT5e
No. of channels: 1
Tightening torque: 0.22 Nm ... 0.25 Nm
Pin assignment: 1:1
Transmission length: 100 m (including patch cables)
Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²
Serial transmission speed:10/100/1000 Mbps
Frequency range: 125 MHz
Connection method: Screw connection
Note on the connection method: CAT5e
No. of channels: 1
Tightening torque: 0.22 Nm ... 0.25 Nm
Pin assignment: 1:1
Transmission length: 100 m (including patch cables)
Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²
Max. AWG conductor cross section, flexible: 16
Min. AWG conductor cross section, flexible: 28
Single-wire/terminal point, rigid AWG max.: 16
Single-wire/terminal point, rigid AWG min.: 28
Stripping length:5 mm
Output nominal voltage: 54 V DC (PoE)
Output power: 60 W
Maximum output power: 75 W (UL)
